Suggestions

varisco brand-logo

Varisco pumps offer self-prime capability for fast start pumping of dirty water, abrasive fluids, and slurries with suspended solids.

Self-priming pumps enable well-pit and sump dewatering with dry sited, easy accessed pumpsets.

Varisco are an established manufacture of self-priming pumps, and their J Series and ST-R ranges are highly regarded for pumping abrasive fluids and suspended solid/dirty water mixes.

The self-priming feature is valued in duties requiring ad-hoc, or frequent stops and starts, and where the pump needs siting significantly above the water level.

Varisco J Series and ST-R Series

The Varisco J Series is the go-to pump for reliable, fast priming in pumping duties that require frequent starts and stops. They hold a reserve of water within the pump at the end of each cycle, providing a pre-primed chamber between duty periods.

Varisco’s ST-R Series are designed for maximum ease of cleaning, unclogging, and maintenance in fiberous and suspended solids sludges and slurry pumping. In addition to their semi-open impeller, large access hatches enable quick unclogging and servicing of all internal parts – without having to disconnect the pipework or lift the pump.

Varisco Self-Priming Water Pump and Self-priming Trash Pump

Both the J and ST-R series share:

  • Self-priming capability without auxiliary systems up to 7.5m suction lift
  • Solids handling up to 76mm (3”)
  • Constructed from materials to match the duty; iron, hardened cast iron, bronze or stainless steel interior/wet parts
  • Can pump air-liquid mixtures in addition to fluids-only
  • Mechanical seals prevent leakage from the shaft
  • Viscosity range up to 50mm2/s (cSt) as standard

Unique features

JE-4-160-G10-FT40-PUMP

J Series:

  • Maximum head: Up to 110m depending on model
  • Maximum flow: Up to 1,200 m3/hr
  • Inlet pipe diameter: 38 – 300mm (12”)
  • Over 70% efficiency rating
Varisco-ST-R-self-priming-trash-pump

ST-R Series:

  • Maximum head: Up to 35m depending on model
  • Maximum flow: Up to 420 m3/hr
  • Inlet pipe diameter: 50 – 200mm (2”, 3”, 4”, 6”, 8”)

Enquire for fast UK service

Our experts will help you find the right pump